The selection of bus flooring must take into account safety, durability, lightness and maintenance costs
PVC plastic flooring, super wear-resistant (up to 300,000 revolutions), anti-slip grade R10-R12, fireproof B1 grade, waterproof, sound absorption (noise reduction 20 decibels)
The application of PVC flooring on buses has become the mainstream of the industry, and its comprehensive performance is significantly better than traditional materials (such as bamboo wood flooring, plywood, etc.). The following analyzes its advantages from the core dimensions of safety, durability, and operational economy, and combines the actual technical parameters for explanation:
I. Safety: Double protection for passengers and vehicles
1. Super anti-slip performance
The surface adopts a special anti-slip texture design (such as multi-directional arc edge structure), and the anti-slip grade reaches R10-R12 (EU standard), which is much higher than ordinary floors.
The friction coefficient is still stable at above 0.6 in a humid environment, effectively preventing passengers (especially the elderly and children) from slipping due to sudden braking or bumps.
2. High-grade fireproof and flame retardant
By adding flame retardants, the fireproof performance reaches B1 level (national standard GB/T 2408-2021), and it will extinguish itself within 5 seconds when encountering fire, and will not release suffocating toxic gases.
3. Accessible and aging-friendly support
It can be matched with a full flat low floor design (no steps), reducing 70% of passenger injury accidents; when the channel width is ≥850mm, it is convenient for wheelchairs to pass.
2. Durability and functional innovation: cope with high-intensity use environment
1. Wear-resistant and long-lasting life
The surface is covered with a pure PVC transparent wear-resistant layer, with a wear-resistant revolution of ≥300,000 revolutions (ISO standard), and a service life of more than 10 years, which is 3 times that of bamboo and wood floors.
The compressive strength of the dense PVC filling layer is increased by 3 times, and it will not deform under long-term load (such as Anaibao floor).
2. 100% waterproof and moisture-proof
The vinyl resin substrate has no affinity with water, and it will not deform or mildew after long-term immersion, which completely solves the problem of moisture and cracking of bamboo and wood floors.
3. Antibacterial purification function
High-end products (such as patented foam board) add photocatalyst layer + activated carbon layer to decompose formaldehyde in the car and purify the infiltrated water.
The surface UV coating inhibits bacterial reproduction, and the antibacterial rate is > 99% (such as Anaibao antibacterial technology).
III. Operational economy: the core advantage of reducing costs and increasing efficiency
1. Lightweight and energy saving (key for new energy vehicles)
PVC flooring has low density, and phenolic felt type can reduce weight by 10%-15%, reduce battery load and extend driving range, and save about 8% of annual operating costs.
2. Extremely low installation and maintenance costs
- Lock-type splicing design (such as convex hook rib + groove structure), no need for gluing, and installation efficiency is increased by 50%.
Daily cleaning only requires wet mopping, and stubborn stains can be treated with neutral detergent, and the maintenance cost is 60% lower than wooden floors.
3. Long-term cost advantage
Although the mid-range PVC floor (80-200 yuan/㎡) is slightly higher than the bamboo plywood (30-50 yuan/㎡), its life span is extended by 3 times + the maintenance cost is sharply reduced, and the full-cycle cost is reduced by 40%.
IV. Environmental protection and compliance: the inevitable choice for green public transportation
The raw material is non-toxic polyvinyl chloride (PVC), which has passed ISO 14001 environmental certification and ENF formaldehyde-free standard.
Recyclable (recycling rate> 90%), in line with the requirements of lightweight and carbon emission reduction of new energy vehicles.
V. Experience upgrade: comfort and aesthetics
Sound absorption and shock absorption: The foam layer structure absorbs stepping noise (noise reduction of 20 decibels) to improve the quietness of the ride.
Customized appearance: hundreds of patterns such as imitation wood grain and stone grain, suitable for luxury bus or theme bus design needs.
Post time: Jul-28-2025
