English

Featured Products

  • Gray Pvc Flooring for Bus and coach Interiors Intercity Bus Flooring

    Gray Pvc Flooring for Bus and coach Interiors Intercity Bus Flooring

    • Eco-Friendly Material: Our gray PVC flooring for bus and coach interiors is made from eco-friendly raw materials, ensuring a sustainable and environmentally responsible choice for your vehicle’s interior.
    • Customizable Color Options: The product allows for a color of your choice, catering to your specific requirements and design preferences.
    • High-Quality Certification: Our product meets international standards with certifications such as IATF16949:2016, ISO14000, and E-mark, guaranteeing its quality and reliability.
    • Convenient Packaging: The flooring rolls are packed in paper tubes inside and kraft paper covers outside, making them easy to store and transport.
    • Competitive Pricing and Service: With a minimum order quantity of 2 rolls and OEM/ODM service available, we offer competitive pricing and flexible solutions to meet your business needs.
    inquirydetail
  • Gray Wood Grain Wear-resistant Vinyl Bus Flooring Rolls

    Gray Wood Grain Wear-resistant Vinyl Bus Flooring Rolls

    PVC wood-grain vinyl flooring = real wood aesthetics + superior waterproofing + exceptional wear resistance + excellent value for money, perfect for modern homes and commercial spaces seeking peace of mind and durability.

    Construction:

    - Surface: UV wear-resistant layer + high-definition wood-grain film (imitation wood texture).

    - Base: PVC resin + stone powder/wood powder (SPC/WPC), zero formaldehyde.

    inquirydetail
  • High-end Anti-slip Gray Wood Grain Wear-resistant Vinyl Bus Flooring Rolls

    High-end Anti-slip Gray Wood Grain Wear-resistant Vinyl Bus Flooring Rolls

    PVC Flooring Installation Steps
    1. Substrate Preparation:
    - The floor must be level (difference within 2 meters ≤ 3mm), dry (moisture content <5%), and free of oil and dirt.
    - For cement-based surfaces, it is recommended to apply a primer (to improve adhesion).

    2. Glue Application:
    - Use a toothed scraper (A2 tooth is recommended, with an adhesive volume of approximately 300-400g/㎡).
    - Allow the glue to dry for 5-10 minutes (until it becomes translucent) before laying the floor.

    3. Laying and Compacting:
    - Lay the floor from the center of the room outward, using a 50kg roller to remove air bubbles.
    - Apply additional pressure to joints to prevent warping.

    4. Curing and Maintenance:
    - Water-based adhesive: Avoid walking on the floor for 24 hours. Allow to fully cure in 48 hours.
    - Solvent-based adhesive: Can be used lightly after 4 hours.

    IV. Common Problems and Solutions
    - Glue not sticking: The substrate is uncleaned or the glue is expired.
    - Floor bulges: Glue applied unevenly or not compacted.
    - Glue residue: Wipe with acetone or a specialized cleaner.

    inquirydetail
  • High-end Wood Grain Transport Vinyl Floor Covering Rolls

    High-end Wood Grain Transport Vinyl Floor Covering Rolls

    PVC Floor Adhesive Application Steps

    1. Substrate Preparation:

    - The floor must be level (difference ≤ 3mm within 2m), dry (moisture content <5%), and free of oil and dirt.

    - For cement-based surfaces, it is recommended to apply a primer (to improve adhesion).

    2. Glue Application:

    - Use a toothed scraper (A2 tooth is recommended, with an adhesive volume of approximately 300-400g/㎡).

    - Allow the glue to dry for 5-10 minutes (until it becomes translucent) before laying the floor.

    3. Laying and Compacting:

    - Lay the floor from the center of the room outward, using a 50kg roller to remove air bubbles.

    - Apply additional pressure to joints to prevent warping.

    4. Curing and Maintenance:

    - Water-based adhesive: Avoid walking on the floor for 24 hours. Allow to fully cure in 48 hours.

    - Solvent-based adhesive: Can be used lightly after 4 hours.

    IV. Common Problems and Solutions
    - Glue not sticking: The substrate is uncleaned or the glue is expired.

    - Floor bulges: Glue applied unevenly or not compacted.
    - Glue residue: Wipe with acetone or a specialized cleaner.

    inquirydetail
  • High-end Anti-slip Light Wood Grain Vinyl Floor Covering Rolls for Public Transportation

    High-end Anti-slip Light Wood Grain Vinyl Floor Covering Rolls for Public Transportation

    Emery PVC flooring is a composite flooring that combines PVC (polyvinyl chloride) elastic flooring with an emery (silicon carbide) wear-resistant layer. It offers exceptional wear resistance, anti-slip properties, and corrosion resistance, making it commonly used in high-use areas such as factories, hospitals, and schools. The following is its production method and key processes:
    I. Basic Structure of Emery PVC Flooring
    1. Wear-Resistant Layer: UV Coating + Emery Particles (Silicon Carbide).
    2. Decorative Layer: PVC Wood Grain/Stone Grain Printed Film.
    3. Base Layer: PVC Foam Layer (or Dense Substrate).
    4. Bottom Layer: Glass Fiber Reinforcement Layer or Cork Soundproofing Pad (Optional).
    II. Core Production Process
    1. Raw Material Preparation
    - PVC Resin Powder: Main Raw Material, Provides Elasticity and Formability.
    - Plasticizer (DOP/DOA): Increases Flexibility.
    - Stabilizer (Calcium Zinc/Lead Salt): Prevents High-Temperature Decomposition (Calcium Zinc is recommended for environmentally friendly options).
    - Silicon carbide (SiC): Particle size 80-200 mesh, mixed in appropriate proportions (typically 5%-15% of the wear-resistant layer).
    - Pigments/Additives: Antioxidants, flame retardants, etc.

    2. Wear-Resistant Layer Preparation
    - Process:

    1. Mix PVC resin, plasticizer, silicon carbide, and UV resin into a slurry.

    2. Form a film through doctor blade coating or calendaring, and UV cure to form a high-hardness surface layer.
    - Key Points:
    - Silicon carbide must be evenly dispersed to avoid clumping that affects surface smoothness.
    - UV curing requires controlled UV intensity and duration (typically 3-5 seconds).

    3. Decorative Layer Printing
    - Method:
    - Use gravure printing technology to print wood/stone grain patterns onto the PVC film.
    - Some high-end products utilize 3D simultaneous embossing technology to achieve a matching texture.
    4. Substrate Forming
    - Compact PVC Substrate:
    - PVC powder, calcium carbonate filler, and plasticizer are mixed in an internal mixer and calendered into sheets.
    - Foamed PVC Substrate:
    - A foaming agent (such as AC foaming agent) is added, and foaming is carried out at high temperature to form a porous structure, improving the foot feel.

    5. Lamination Process
    - Hot Press Lamination:

    1. The wear-resistant layer, decorative layer, and substrate layer are stacked in sequence.

    2. The layers are pressed together under high temperature (160-180°C) and high pressure (10-15 MPa).

    - Cooling and Shaping:
    - The sheet is cooled by cold water rollers and cut into standard sizes (e.g., 1.8m x 20m rolls or 600x600mm sheets).

    6. Surface Treatment
    - UV Coating: A secondary application of UV varnish enhances gloss and stain resistance.

    - Antibacterial Treatment: A medical-grade silver ion coating is added.
    III. Key Quality Control Points
    1. Abrasion Resistance: The abrasion resistance level is determined by the carborundum content and particle size (must pass EN 660-2 testing).
    2. Slip Resistance: The surface texture design must meet R10 or higher slip resistance standards.
    3. Environmental Protection: Testing for limits for phthalates (6P) and heavy metals (REACH).
    4. Dimensional Stability: The glass fiber layer reduces thermal expansion and contraction (shrinkage ≤ 0.3%).
    IV. Equipment and Cost
    - Main Equipment: Internal Mixer, Calender, Gravure Printing Press, UV Curing Machine, Hot Press.
    V. Application Scenarios
    - Industrial: Warehouses and Workshops (forklift resistance).
    - Medical: Operating Rooms and Laboratories (antibacterial requirements).
    - Commercial: Supermarkets and Gyms (high-traffic areas with anti-slip properties).
    For further formulation optimization (e.g., to improve elasticity or reduce costs), the plasticizer ratio can be adjusted or recycled PVC can be added (paying attention to the performance balance).

    inquirydetail
  • Anti-slip Red Wood Grain Wear-resistant Vinyl Floor Covering for Public Transportation

    Anti-slip Red Wood Grain Wear-resistant Vinyl Floor Covering for Public Transportation

    Emery wood-grain flooring is a new flooring material that combines an emery wear layer with a wood-grain decorative layer, offering both practicality and aesthetics.
    1. What is emery wood-grain flooring?
    - Material Structure:
    - Base Layer: Typically a high-density fiberboard (HDF) or cement-based substrate, providing stability.
    - Decorative Layer: The surface features a realistic wood grain pattern (such as oak or walnut), mimicking the texture of natural wood.
    - Wear Layer: Contains emery (silicon carbide) particles, significantly enhancing surface hardness and scratch resistance.
    - Protective Coating: A UV lacquer or aluminum oxide coating enhances water and stain resistance.
    - Features:
    - Superior Wear Resistance: Emery makes the floor more scratch-resistant than ordinary laminate flooring, making it suitable for high-traffic areas.
    - Waterproof and Moisture-Resistant: Some products are IPX5 rated, suitable for humid environments such as kitchens and basements.
    - Environmental Performance: No formaldehyde emissions (depending on the base material; look for E0 or F4-star standards).
    - High cost-effectiveness: Lower price than solid wood flooring, yet with a similar visual effect.
    2. Suitable Applications
    - Home: Living rooms, bedrooms, and balconies (especially suitable for homes with pets or children).
    - Commercial: Shops, offices, showrooms, and other locations requiring wear resistance and a natural look.
    - Special Areas: Basements and kitchens (waterproof models are recommended).
    3. Advantages and Disadvantages
    - Advantages:
    - Long wear life of 15-20 years, far exceeding that of ordinary wood flooring.
    - High fire rating (B1 flame retardant).
    - Easy installation (lock-on design allows installation over existing floors).
    - Disadvantages:
    - Hard feel underfoot, not as comfortable as solid wood flooring.
    - Poor repairability; severe damage requires replacement of the entire board.
    - Some lower-priced products may not feature realistic wood grain printing.

    inquirydetail
  • Anti-slip Carpet Pattern Wear-resistant PVC Bus Flooring Rolls

    Anti-slip Carpet Pattern Wear-resistant PVC Bus Flooring Rolls

    Using carpet-textured corundum flooring on buses is a practical and innovative option, particularly suitable for high-traffic public transportation that requires both slip resistance, wear resistance, and easy cleaning. The following are its advantages, precautions, and implementation recommendations:
    I. Advantages
    1. Excellent Anti-Slip Performance
    - The rough texture of the corundum surface significantly increases friction, effectively preventing slips even in rainy days or when passengers’ shoes are wet, reducing the risk of falls.
    - The carpet-textured design further increases tactile resistance, making it suitable for the frequent stops and starts of buses.
    2. Superior Wear Resistance and Long Life
    - The corundum (silicon carbide or aluminum oxide) is extremely hard and can withstand constant foot traffic, luggage dragging, and wheel friction, reducing floor wear and requiring fewer replacements.
    3. Fire Retardant
    - Corundum is an inorganic material that meets the fire-resistant material requirements for buses (such as GB 8624), eliminating the flammability hazards associated with carpet-like materials. 4. Easy Cleaning and Maintenance
    - The non-porous surface allows stains and oil stains to be wiped directly or high-pressure washed, eliminating the problem of fabric carpets harboring dirt and grime, making it suitable for quick cleaning needs on buses.
    5. Cost-Effectiveness
    - While the initial cost may be higher than ordinary flooring, the long-term savings on maintenance and replacement costs make it a highly cost-effective solution.
    II. Precautions
    1. Weight Control
    - Due to the high density of corundum, the vehicle’s weight distribution must be assessed to avoid impacting fuel efficiency or electric vehicle range. Thin-layer processes or composite lightweight substrates can be used.
    2. Comfort Optimization
    - The surface texture should balance slip resistance and foot feel, avoiding excessive roughness. Adjusting the corundum particle size (e.g., 60-80 mesh) or adding a resilient backing (e.g., rubber mats) can reduce fatigue.
    3. Drainage Design
    - Integrate with the slope of the bus floor to ensure that accumulated water can quickly drain to the diversion channels on both sides, preventing the accumulation of water film on the corundum surface. 4. **Aesthetics and Customization**
    - Available in a variety of colors (such as gray and crimson) or custom patterns to match the bus interior style and avoid a monotonous industrial look.

    5. Installation Process
    - Professional installation is required to ensure a strong bond between the corundum layer and the substrate (such as metal or epoxy resin) to prevent peeling due to long-term vibration.

    III. Implementation Recommendations
    1. Pilot Application*
    - Prioritize use in slippery areas such as steps and walkways, then gradually expand to the entire vehicle floor.
    2. Composite Material Solutions
    - For example: epoxy resin + corundum coating (2-3mm thickness), which combines strength and lightweight.
    3. Regular Inspection and Maintenance
    - While highly wear-resistant, edges should be regularly inspected for warping and coating peeling, and repairs should be made promptly.
    4. Compliance with Industry Standards
    - Must pass certifications such as the “Bus Interior Material Safety” to ensure environmental friendliness (low VOC) and the absence of sharp protrusions.

    Conclusion: Carpet-pattern corundum flooring is well-suited to the functional needs of buses, particularly in terms of safety and durability. It is recommended to cooperate with vehicle manufacturers to optimize the design for specific models and conduct small-scale tests to verify the actual effect.

    inquirydetail
  • High-end Brown Wood Grain Wear-resistant Bus Flooring Rolls

    High-end Brown Wood Grain Wear-resistant Bus Flooring Rolls

    Wood-grain PVC flooring is a polyvinyl chloride (PVC) flooring with a wood-grain design. It combines the natural beauty of wood flooring with the durability and waterproofness of PVC. It is widely used in homes, businesses, and public spaces.
    1. Classification by Structure
    Homogeneous perforated PVC flooring: Features a solid wood-grain design throughout, with a wear-resistant layer and integrated pattern layer. Suitable for high-traffic areas.
    Multi-layer composite PVC flooring: Consists of a wear-resistant layer, a wood-grain decorative layer, a base layer, and a base layer. It offers high cost-effectiveness and a wide variety of patterns.
    SPC stone-plastic flooring: The base layer is made of stone powder + PVC, offering high hardness, waterproofness, and moisture resistance, making it suitable for underfloor heating environments.
    WPC wood-plastic flooring: The base layer contains wood powder and PVC, and feels closer to real wood, but is more expensive.

    2. Classification by Shape
    -Sheet: Square blocks, suitable for DIY assembly.
    -Roll: Laid in rolls (usually 2m wide), with minimal seams, suitable for large spaces.
    -Interlocking panels: Long strips (similar to wood flooring) that connect with snaps for easy installation. II. Core Advantages
    1. Waterproof and Moisture-Proof: Completely waterproof and suitable for damp areas such as kitchens, bathrooms, and basements.
    2. Wear-Resistant and Durable: The surface wear layer can reach 0.2-0.7mm, and commercial-grade products have a lifespan of over 10 years.
    3. Simulated Solid Wood: 3D printing technology is used to reproduce the texture of oak, walnut, and other woods, and the texture also has a convex and concave wood grain design.
    4. Easy Installation: Can be installed directly, self-adhesive, or with a snap-on design, eliminating the need for studs and reducing floor height (thickness is typically 2-8mm).
    5. Environmentally Friendly: High-quality products comply with standards such as EN 14041 and are low in formaldehyde (test report required).
    6. Simple Maintenance: Daily sweeping and mopping are sufficient, no waxing required.
    III. Applicable Applications
    – Home Decoration: Living rooms, bedrooms, balconies (alternative to wooden floors), kitchens, and bathrooms.
    – Industrial Decoration: Offices, hotels, shops, and hospitals (commercial wear-resistant grades are required).
    – Special needs: floor heating environment (select SPC/WPC substrate), basement, rental renovation.

    inquirydetail
  • 2mm Waterproof and Fireproof Plastic PVC Emery Anti-slip Flooring for Bus Subway and Train

    2mm Waterproof and Fireproof Plastic PVC Emery Anti-slip Flooring for Bus Subway and Train

    ‌‌

    ‌PVC Emery Flooring has the following product characteristics in the subway:
    ‌Abrasion resistance and service life: PVC Emery Flooring has super wear resistance and a service life of up to twenty years. There is a thin layer of frosted material on its surface, which has good grip.
    ‌Anti-slip performance: The embedding of Emery particles makes the floor have a permanent anti-slip function, especially in a humid environment, it is more astringent when it comes into contact with water, which increases safety.
    ‌Sound absorption effect: The floor can absorb more than 16 decibels of environmental noise, which helps to reduce noise pollution in subway cars.
    ‌Flame retardant performance: The product meets the national fireproof material b1 flame retardant standard and has high safety.
    ‌Antistatic and corrosion resistance: The floor material has good antistatic properties and can resist the short-term action of solvents and diluted acids and alkalis without damaging the floor.
    ‌Easy to clean: After surface treatment technology, the floor is extremely easy to clean and easy to maintain.
    Environmental protection: PVC Emery Flooring is made of natural rubber, synthetic rubber, natural mineral fillers and harmless pigments, which is environmentally friendly.

    inquirydetail
  • Waterproof Durable Pvc Vinyl Flooring Rolls for Kindergarten Hospital Bacteria-proof Indoor Medical Vinyl Flooring 2mm

    Waterproof Durable Pvc Vinyl Flooring Rolls for Kindergarten Hospital Bacteria-proof Indoor Medical Vinyl Flooring 2mm

    Factory production workshop pvc plastic floor
    Applicable places: workshop, factory, warehouse, factory, etc.
    Floor parameters
    Material: PVC
    Shape: roll
    Length: 15m, 20m
    Width: 2m
    Thickness: 1.6mm-5.0mm (length/width/thickness can be customized, please contact customer service for details)
    Type: dense pvc plastic floor, foamed pvc plastic floor, same transparent pvc plastic floor

    The application of PVC floor is functional and applicable, and the selection and use of PVC floor is also based on different floor functions. For example, the floor used in hospital wards must be required to have basic requirements such as wear resistance, pollution resistance, environmental protection, fire prevention, and sound insulation; while the floor used in shopping malls and hotels must be wear-resistant. The pollution resistance and sound insulation of the floor should be considered. The basic characteristics of shock absorption, fire prevention and applicability; for the floor used in school classrooms, the requirements of wear resistance, pollution resistance, environmental protection, anti-slip, impact resistance and sound insulation of the floor should be considered; for the floor used in sports venues, the suitability and satisfaction of the sports venues, then the wear resistance of the floor should be considered. For the floors with anti-static requirements in electronic workshops and computer rooms, it should be ensured that the floors do not generate static electricity under the conditions of wear resistance, pollution resistance, environmental protection, cleanliness and easy cleaning. From this we can see that different places need to choose different PVC floors, and they cannot be generalized.

    inquirydetail
  • Wood Grain Wear-resistant Vinyl Bus Flooring Rolls

    Wood Grain Wear-resistant Vinyl Bus Flooring Rolls

    • Durable and Wear-Resistant: Our Gray Wood grain wear-resistant vinyl bus flooring rolls are designed to withstand heavy use and harsh environments, ensuring a long-lasting finish and minimizing maintenance needs.
    • Customizable Color Options: Available in a variety of colors to match your specific requirements, this product allows for tailored solutions to meet individual needs.
    • Compliance with International Standards: Certified to IATF16949:2016, ISO14000, and E-Mark, our product meets rigorous international standards for quality and environmental responsibility.
    • Eco-Friendly and Lightweight: Made from eco-friendly raw materials, this flooring roll is not only gentle on the environment but also features a lightweight design for easy installation and transportation.
    • Tailored Solutions with OEM/ODM Services: Our team offers OEM/ODM services to cater to your specific requirements, ensuring a seamless integration of our product into your existing production lines.
    inquirydetail
  • 3mm Anti Bacterial Hospital PVC Flooring Uv Resistant Waterproof Homogeneous PVC Vinyl Flooring Roll

    3mm Anti Bacterial Hospital PVC Flooring Uv Resistant Waterproof Homogeneous PVC Vinyl Flooring Roll

    Thickened wear-resistant layer
    Thickened anti-pressure layer
    Increased thickness, comfortable foot feel
    Shock absorption, no fear of falling
    New material dense bottom
    Paste resin foam layer
    Customized glass fiber, improve stability
    New surface embossing
    New material, more environmentally friendly
    Dongguan Quanshun commercial flooring only uses new materials, no recycled materials, not at all. Suitable for public spaces such as hospitals, schools, offices, shopping malls, supermarkets, factory workshops, etc.,
    Old people and children can also use it.
    Medical grade mask cloth
    Dense anti-pressure series, the backing fabric is made of medical grade mask cloth,
    Ensure walking on an environmentally friendly floor.
    0 pores, no fear of pressure
    The dense anti-pressure series uses dense and transparent materials as the bottom layer, and the density of the bottom layer has achieved 0 pores.
    Waterproof, fireproof and flame retardant
    Does not absorb water, does not mold.
    The fire protection level reaches B1, and it will extinguish itself after leaving the flame for five seconds,
    Does not release suffocating gas.

    inquirydetail
123456 Next > >> Page 1 / 6
© Copyright - 2010-2024 : All Rights Reserved.
Sitemap - AMP Mobile
Synthetic Leather, artificial Leather, Faux Leather, PU Synthetic Leather, PU Leather, Cork Fabric,